Corrugated rollers are very common in industrial production, used for coating, composite materials, transportation and other processes. In the production of rubber rolls, according to different production process requirements, the rubber layer produced by the rubber roll factory will use different materials. The following are classified according to the different materials of the rubber layer, which can be divided into natural rubber roller, ethylene propylene rubber roller, neoprene rubber roller, silicone rubber roller, fluorine rubber roller, etc. 1. Natural rubber roller: This rubber roller has excellent elasticity, mechanical strength and good alkali resistance, often used in paper leather, textile packaging equipment, metallurgical mining and other traction rubber roller. 2. Ethylene propylene rubber roller: has excellent ozone aging resistance and weather resistance, can work for a long time at -65 ° C ~140 ° C, excellent insulation performance. Rubber rollers can be used in plastic printing machinery, leather manufacturing machinery and other general fields. Corrugating rollers and printing rollers are commonly used.
Corrugated rollers are rolled products with metal or other materials as the core and covered with rubber and sulfide. Widely used in papermaking, printing and dyeing, film, printing and other industries. According to different production process requirements, different rubber materials and surface treatment processes are used. Commonly used rubber, such as nitrile rubber, polyurethane rubber, silicone rubber and so on. In the daily use of corrugated rollers, it should be used according to the technical requirements of rubber roller factory products and the corresponding rubber roller specifications. Pay special attention to the influence of temperature, pressure, radiation and other related parameters. Drum surface cleaning is a routine operation in the working day production process. If there is dirt on the surface of the drum, try to clean it with a cleaning solvent (such as alcohol or water) that will not damage the rubber surface. If it is not cleaned for a long time, the surface of the drum will be uneven, the light side will affect the use, and the heavy side will damage the relevant materials and equipment. Therefore, the surface of the corrugated roller should be clean, especially when it is not started.
The application effect and simple troubleshooting method of roller auxiliary equipment are discussed. Some problems existing in standardized operation and practical application of pneumatic rubber roll sleeve press, pneumatic double head rubber roll feeder, automatic rubber roll processing, grinding and maintenance are introduced, and concrete solutions are put forward. To be familiar with the operation key points and methods of the roller auxiliary equipment, and strengthen the maintenance of the roller auxiliary equipment. It is suggested that the auxiliary equipment of the roller should meet the new requirements of pressure, grinding and maintenance of the roller in each spinning process, so that the roller can play a better role in spinning.